STMicroelectronics STM32G473MCT6 LQFP(80) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR80LQFPA, FVE4ASMR80LQFPA | FVE4ASMR80LQFPA |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR80LQFPA, FVE4ASMR80LQFPA | FVE4ASMR80LQFPA |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | ARM-based 32-bit MCU |
| Device Size: | 256K-Byte Flash + 1K-Byte OTP Area. |
| Algorithm Programming Method: | SWD protocol. |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main Flash Memory | R/W/E | Yes | 0800_0000 – 0803_FFFF | 0800_0000 – 0803_FFFF |
| OTP User Section | R/W | No | 1FFF_7000 – 1FFF_73FF | 1FFF_7000 – 1FFF_73FF |
| Default Algorithm Range | — | — | 0800_0000 – 0803_FFFF | 0800_0000 – 0803_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations:
| 1. | If RDP protection is set to anything other than level 0(None AAh) flash operations will fail.
| 2. |
Stand alone operation might fail if device was programmed with executable code. |
| ||
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 536835072 |
|---|---|
| Manufacturer | STMicroelectronics |
| Packages | LQFP(80) |
| Part Number | STM32G473MCT6 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |