STMicroelectronics STM32H743XIH6 BGA(289) Device
Adapters for Automated Programmers
| 9th Gen |
| LX4ASMR265BGAXI |
Adapters for Manual Programmers
| 9th Gen |
| LX4ASMR265BGAXI |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | ARM-based 32-bit MCU. |
| Device Size: | 2M-Byte Flash |
| Algorithm Programming Method: | SWD protocol. |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main Flash Memory | R/W/E | Yes | 0800_0000 – 081F_FFFF | 0800_0000 – 081F_FFFF |
| Default Algorithm Range | — | — | 0800_0000 – 081F_FFFF | 0800_0000 – 081F_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations:
| 1. | If RDP protection is set to level 1(None AAh Non CCh) all flash memory cannot be read. If RDP protection is set to level 2(CCh) device debug interface is disabled. Any operation on device fails.
| 2. |
32 Option Bytes are mapped to the buffer at [0x1FFF_0000-0x1FFF_0018] Please set Option Bytes under Device > Config. |
‘ BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable. Additional information
| ||||||||||||||||