STMicroelectronics STM32L011F4P7 TSSOP(20) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR20TSX, FVE4ASMR20TSX | FVE4ASMR20TSX |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR20TSX, FVE4ASMR20TSX | FVE4ASMR20TSX |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | ARM Cortex-M0+ 32-bit MCU |
| Device Size: | 16K-Byte Flash Memory + 512-Byte Data EEPROM |
| Algorithm Programming Method: | UART |
Memory Organization:
| Memory Type | Attributes* | Included inDefault Range | DUT Physical ByteAddress (hex) | BPWin Buffer ByteAddress (hex) |
| Flash Program Memory | R/W/E | Yes | 0800_0000 – 0800_3FFF | 0800_0000 – 0800_3FFF |
| Data EEPROM | R/W/E | No | 0808_0000 – 0808_01FF | 0808_0000 – 0808_01FF |
| Option Bytes | R/W/E | No | 1FF8_0000 – 1FF8_0013 | 1FF8_0000 – 1FF8_0013 |
| Default Algorithm Range | — | — | 0800_0000 – 0800_3FFF | 0800_0000 – 0800_3FFF |
* R/W/E: readable and rewritable if not locked. Memory ranges can be selected under Device->Settings. Option Bytes:
| Byte Address (hex) | Option Bytes |
| 1FF8_0000 | FLASH_OPTR[15..0] |
| 1FF8_0002 | nFLASH_OPTR[15..0] |
| 1FF8_0004 | FLASH_OPTR[31..16] |
| 1FF8_0006 | nFLASH_OPTR[31..16] |
| 1FF8_0008 | FLASH_WRPROT1[15..0] |
| 1FF8_000A | nFLASH_WRPROT1[15..0] |
| 1FF8_000C | FLASH_WRPROT1[31..16] |
| 1FF8_000E | nFLASH_WRPROT1[31..16] |
| 1FF8_0010 | FLASH_WRPROT2[15..0] |
| 1FF8_0012 | nFLASH_WRPROT2[15..0] |
Special Device Considerations:
| 1. | Selecting Erase operation will do a global erase including the IAP area andoption bytes. |
| 2. | If the RDP protection is set to level 1 (non-AAh non-CCh) the Program FlashData EEPROM and the backup registers are totally inaccessible. The optionbytes also will not be verified after a Program operation. The device must beerased to perform subsequent operations. |
| 3. | If the RDP protection is set to level 2 (CCh) the option bytes will not beverified after a Program operation and any subsequent operations on thedevice will fail. |
| 4. | If the boot mode is modified to boot from anything other than systemmemory the option bytes will not be verified after a Program operationand any subsequent operations on the device will fail. Please see thedevice reference manual for more information. |
| 5. | If the device is programmed with executable code any subsequentoperations may fail. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 536346644 |
|---|---|
| Manufacturer | STMicroelectronics |
| Packages | TSSOP(20) |
| Part Number | STM32L011F4P7 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |