STMicroelectronics STM32L475RCT7 LQFP(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR64LQFP | FX4ASMR64LQFP, FASMR64LQFP |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSMR64LQFP, FASMR64LQFP | FX4SMR64LQFP, FSMR64LQFP, FX4ASMR64LQFP, FASMR64LQFP, LASMR64LQFP (repl.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR64LQFP, FASMR64LQFP | FX4SMR64LQFP, FSMR64LQFP, FX4ASMR64LQFP, FASMR64LQFP, LASMR64LQFP (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | ARM-based 32-bit MCU |
| Device Size: | 256 KByte Flash Memory + 1 Kbytes of OTP memory |
| Algorithm Programming Method: | JTAG + Custom bootloader |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main Flash Memory | R/W/E | Yes | 0800_0000 – 0803_FFFF | 0800_0000 – 0803_FFFF |
| OTP Memory | R/W | No | 1FFF_7000 – 1FFF_73FF | 1FFF_7000 – 1FFF_73FF |
| Option Bytes for Bank 1 | R/W/E | Yes | 1FFF_7800 – 1FFF_780F | 1FFF_7800 – 1FFF_780F |
| Option Bytes for Bank 2 | R/W/E | Yes | 1FFF_F800 – 1FFF_F80F | 1FFF_F800 – 1FFF_F80F |
| Default Algorithm Range | — | — | 0800_0000 – 0803_FFFF | 0800_0000 – 0803_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| Option | Description | Default | Supported (Y/N)? |
| RDP protection | Option byte 0: at buffer address 1FFF_7800h (bits 7-0) has the settings for read protection If RDP protection is set to level 1(Non AAh Non CCh) all flash memory cannot be read. If RDP protection is set to level 2(CCh) device debug interface is disabled. Any further operation on device will fail. | Level 0 | Yes |
| 1. | Selecting Erase operation will do a Mass Erase of flash memory and always erase the option bytes. | |
| 2. | Stand alone operation might fail if device was programmed with executable code. | |
| 3. | PCROP_RDP is set only and can only be cleared by changing the RDP level from 1 to 0. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | STMicroelectronics |
|---|---|
| Packages | LQFP(64) |
| Part Number | STM32L475RCT7 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |