STMicroelectronics STM32L552RET3 LQFP(64) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR64LQFPF, FVE4ASMR64QPG, FVE4ASMR64QPG, FVE4ASMR64LQFPF | FVE4ASMR64QPG, FVE4ASMR64LQFPF |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR64LQFPF, FVE4ASMR64QPG, FVE4ASMR64QPG, FVE4ASMR64LQFPF | FVE4ASMR64QPG, FVE4ASMR64LQFPF |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.
| Device Type: | ARM-based 32-bit MCU |
| Device Size: | 256KByte Flash + 512-Byte OTP Area. |
| Algorithm Programming Method: | SWD protocol. |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main Flash Memory | R/W/E | Yes | 0800_0000 – 0803_FFFF | 0800_0000 – 0803_FFFF |
| OTP User Section | R/W | No | 0BFA_0000 – 0BFA_01FF | 0BFA_0000 – 0BFA_01FF |
| Default Algorithm Range | — | — | 0800_0000 – 0803_FFFF | 0800_0000 – 0803_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations:
| 1. | If RDP protection is set to level 1(None AAh Non CCh) all flash memory cannot be read. If RDP protection is set to level 2(CCh) device debug interface is disabled. Any operation on device fails.
| 2. |
This algorithm does not disable Trustzone.Once it is enabled flash operations may fail to run correctly.
| 3. |
Select secure to enable Trustzone and to set RDP protection.
| 3. |
Mass erase can regress only RDP level 1 regression. |
| ||||
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 200941568 |
|---|---|
| Manufacturer | STMicroelectronics |
| Packages | LQFP(64) |
| Part Number | STM32L552RET3 |
| Set programming | Yes |
| Vcc(program) | 3.3 |