STMicroelectronics STR750FV2T6 QFP(100) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASM100TQSA | FX4ASM100TQSA, FASM100TQSA, LX4ASM100TQSA (repl.) | LX4ASM100TQSA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM100TQSA, FASM100TQSA | FX4SM100TQSA, FSM100TQSA, FX4ASM100TQSA, FASM100TQSA, LX4ASM100TQSA (repl.) | LX4ASM100TQSA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM100TQSA, FASM100TQSA | FX4SM100TQSA, FSM100TQSA, FX4ASM100TQSA, FASM100TQSA, LX4ASM100TQSA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with (256+16)KB Flash Memory. The Flash Memory is located at physical address20000000h-200C3FFFh and is mapped to Data Pattern addresses [000000h-C3FFFh].Addresses 20040000h-200BFFFFh (Data Pattern [040000h-0BFFFFh]) are reserved and will not be programmed or verified.To enable Write Protection set the bits of the FLASH_NVWPAR register under Device Configure.These bits are OTP but the device is temporarily unprotected during Program and Eraseso it can still be modified by the programmer.Once Secured (Read protection) the device can no longer be accessed by the programmer.This device is 32bit wide little endian.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | STMicroelectronics |
|---|---|
| Packages | QFP(100) |
| Part Number | STR750FV2T6 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |