STMicroelectronics uPSD3233BV-T QFP(52) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM52QBA (obs.), FASM52QBM (obs.) | FASM52QBA (obs.), FASM52QBM (obs.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM52QBA (obs.), FSM52QBM (obs.), FASM52QBA (obs.), FASM52QBM (obs.) | FSM52QBA (obs.), FSM52QBM (obs.), FASM52QBA (obs.), FASM52QBM (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM52QBA (obs.), FSM52QBM (obs.), FASM52QBA (obs.), FASM52QBM (obs.) | FSM52QBA (obs.), FSM52QBM (obs.), FASM52QBA (obs.), FASM52QBM (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Make sure that the default buffer value under Buffer/Options’is set to 00h before loading data patterns.For correct checksum calculationin the buffer addresses [340CFh] [340E0h-340E1h] should be set to 00h;in the device run Device/Sum command.Before load the buffer please set the ‘Automatic lowest address to load’under Buffer/Options to ‘DISABLE’.Erase before programming and Verification after programming are redundant operations. To disable them go to ‘Device/Options’ set ‘Verify after programming’ to ‘NONE’and set ‘Erase before programming’ to ‘DISABLE’. Check electronic identifiersunder Device/Options must be set to ENABLE. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 213250 |
|---|---|
| Manufacturer | STMicroelectronics |
| Packages | QFP(52) |
| Part Number | uPSD3233BV-T |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |