SUMMIT Microelectronics SMB113AN LAP(32) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Four Channel Programmable DC-DC Power Manager. In the Buffer addresses [00h-9Fh] are for the Configuration Registers [A0h-FFh] are for 96-Byte General-Purpose Memory. The GP Memory can be programmed with any data but only part of the Configuration Registers are programmable. For some Registers certain bits are either unused or read-only. For the read-only bits please set them to default value 0′ attempting to change them will cause part malfunction. See the Device Application Note on how to use the Registers. Register 16 controls the locking of the Configuration Registers and General-Purpose Memory Register 17 contains the I2C slave address. These two Registers can be set in Device Configure menu or buffer addresses 16h and 17h respectively. Locking the Configuration Registers will prevent them from further programming and it is irreversible. ‘