Adapters for Automated Programmers
6th Gen | 7th Gen |
FASM48TQN, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD | FASM48TQN, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD |
Adapters for Manual Programmers
6th Gen | 7th Gen |
FSM48TQN, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD | FSM48TQN, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD |
Adapters for Engineering Programmers
6th Gen | 7th Gen |
FSM48TQN, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD | FSM48TQN, FASM48TQN, FSM48TQF, FSM48TQNA, FSM48TQ, FSM48TQA, FSM48TQD, FASM48TQF, FASM48TQNA, FASM48TQ, FASM48TQA, FASM48TQD |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Quad Trakking Power Supply Manager.Algorithm has been updated based on SUMMIT Product Change Notice (PCN Number: 020308-01A).Configuration registers (32 bytes) are mapped to 00h-1Fh in the buffer.EEPROM (256 bytes) is mapped to 20h-11Fh in the buffer.Fault Status Register (1Dh 1Ehand 1Fh) values under Device Configure must be setto zero during Programming. A Read on the device will give the current status of the Fault StatusRegisters. Bit 5 of register 18h should be set to zero.Bits 7 and 6 of register 18h are read only. They are ignoredduring Program and Verify but will cause an error during Compare if the value differs fromthat of the device. Please refer to SMT4004 data sheet for more information.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
8-bit Bytes | 288 |
---|---|
Manufacturer | SUMMIT Microelectronics |
Packages | QFP(48) |
Part Number | SMT4004 |
Vcc(program) | 5 |
Package |