Texas Instruments CDCE62002-RHB QFN(32) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR32MLFT, LASMR32MLFT (repl.) | FASMR32MLFT, LASMR32MLFT (repl.) | LASMR32MLFT |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR32MLFT, FASMR32MLFT, LASMR32MLFT (repl.) | FSMR32MLFT, FASMR32MLFT, LASMR32MLFT (repl.) | LASMR32MLFT |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR32MLFT, FASMR32MLFT, LASMR32MLFT (repl.) | FSMR32MLFT, FASMR32MLFT, LASMR32MLFT (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Four Output Clock Generator/Jitter Cleaner with Integrated Dual VCOs. 2 Configuration registers are available for EEPROM. They are mapped to the Data Pattern as follow: ——————————————————————— Data Pattern [00][01][02][03] Data Pattern [04 ][05][06][07] Register0 [XX][XX][XX][X0] Register1 [SLxxX][XX][XX][X1] ——————————————————————— S: EESTATUS bit(Read Only) L: EELOCK bit. x = Configuration bit. X = Configuration bits in hex. Last 4 bits of every 32-Bit word must be a constant that corresponds to the register address. Otherwise Program will fail. EELOCK bit in Register1 is programmed and verified under Device Configure. After programming EELOCK bit(1) the EEPROM is permanently locked and cannot be written to. TI GUI Checksum is available under Device -> TI_GUI_Checksum. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 8 |
|---|---|
| Manufacturer | Texas Instruments |
| Packages | QFN(32) |
| Part Number | CDCE62002-RHB |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |