Texas Instruments CDCE6214RGER (Custom 02) LAP(24) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMR24QFNB |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMR24QFNB |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Device Information:
| Device Type: | Ultra Low Power Clock Generator |
| Algorithm Programming Method: | I2C |
Memory Organization:
| Section | Attributes* | BPWin Buffer Byte Address (hex) | BPWin Buffer Word Address (hex) |
| EEPROM Text File (.hxt) | R/W/E | 0000h – 3FFFh | 0000h – 1FFFh |
| Custom Bit Masks | N/A | 4000h – 407Fh | 2000h – 203Fh |
* R/W/E: readable and rewritable Special Device Considerations:
| 1. | This algorithm will parse a .hxt extension file for the EEPROM.When loading the data pattern select Load File As ‘Binary.’ | |
| 2. | EEPROM data must include all EEPROM addresses (0 – 63). | |
| 3. | Serialization is not supported for this device. | |
| 4. | Read operation will print out the contents of the EEPROM to the output window.It will not ouput valid data to the buffer. | |
| 5. | By default the algorithm will use bit mask values defined in the datasheet.Custom bit masks can be selected under Device->Settings.The values will then need to be defined in the BPWin Data Buffer in the range above. | |
Default Bit Masks:
| Address | Mask (hex) | Address | Mask (hex) | Address | Mask (hex) | ||||||||
| 7 | E3FFh | 10 | 07C1h | 13 | 81F0h | ||||||||
| 8 | FE0Fh | 11 | E0FEh | 15 | FFFDh | ||||||||
| 9 | FFC0h | 12 | 7F03h |
Any EEPROM addresses not shown above use FFFFh bit masks by default. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Texas Instruments |
|---|---|
| Packages | LAP(24) |
| Part Number | CDCE6214RGER |
| Set programming | Yes |
| Vcc(program) | 3.3 |