Texas Instruments MSP430F5659IPZR QFP(100) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Microcontroller with Flash EPROM. Memory organization: Bootstrap loader(BSL) Memory: 0800h-0BFFh (Device Address 16-bit) 1000h-17FFh (Data Pattern Address 8-bit) Information Memory: 0C00h-0CFFh (Device Address 16-bit) 1800h-19FFh (Data Pattern Address 8-bit) Main Memory: 4000h-43FFFh (Device Address 16-bit) 8000h-087FFFh (Data Pattern Address 8-bit) Each segment of the Information Memory and Main Memory may be Erased and Programmed separately. To access the Information Memory only set the Device > Range between C00h-CFFh (device address). Information Memory data will be displayed in Data Pattern locations 1800h-19FFh. To access the Main Memory only set the Device > Range between 4000h-43FFFh (device address). Main Memory data will be displayed in Data Pattern locations 8000h-087FFFh To access both Information and Main Memory set the range as 0000h-43FFFh (device address). Device address 7FC0h-7FFFh(Data Pattern location FF80h-FFFFh) are Interrupt Vectors. Programming invalid data to these locations may prevent further access to the device. The default device range is set to [0C00h-43FFFh]. This excludes BSL memory. Please select Entire Device’ under Device > Range if BSL Memory needs to be included. If Bootstrap loader(BSL) memory is programmed with executable code stand alone operation might fail. To enable secure JTAG buffer address range 17FCh-17FF must have non FFFFFFFFh or non 00000000h values AND Secure operation must be enabled. If Secure operation is not enabled then address range 17FCh-17FF will be left at the default value and will not be included in the compare. ‘