Texas Instruments MSP430G2313IPW28 TSSOP(28) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR28TSEA, FASMR28TS, FASM28TS | FX4ASMR28TSEA, FASMR28TSEA, FASMR28TS, FASM28TS, LX4ASMR28TSEA (repl.) | LX4ASMR28TSEA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR28TS, FSM28TS, FASMR28TSEA, FASMR28TS, FASM28TS | FSMR28TS, FSM28TS, FX4ASMR28TSEA, FASMR28TSEA, FASMR28TS, FASM28TS, LX4ASMR28TSEA (repl.) | LX4ASMR28TSEA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR28TS, FSM28TS, FASMR28TSEA, FASMR28TS, FASM28TS | FSMR28TS, FSM28TS, FX4ASMR28TSEA, FASMR28TSEA, FASMR28TS, FASM28TS, LX4ASMR28TSEA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | MSP430 16-bit RISC MCU |
| Device Size: | 4K-Byte Main Flash Memory +256-Byte Information Memory |
| Algorithm Programming Method: | JTAG protocol |
Memory Organization:
| Memory Type |
Attributes* |
Included in DefaultRange (Y/N) | DUT PhysicalAddress (hex) | BPWin BufferAddress (hex) |
| Information Memory | R/W/E | Yes | Byte: 1000 – 10FFWord: 0800 – 087F | Byte: 1000 – 10FFWord: 0800 – 087F |
| Main Memory | R/W/E | Yes | Byte: F000 – FFFFWord: 7800 – 7FFF | Byte: F000 – FFFFWord: 7800 – 7FFF |
| Default Algorithm Range | — | — | Byte: 0000 – FFFFWord: 0000 – 7FFF | Byte: 0000 – FFFFWord: 0000 – 7FFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Special Device Considerations:
| 1. | Data Pattern byte addresses 0000h – 0FFFh and 1100h – EFFFh are reserved and must contain data FFh. |
| 2. | Each segment of the Information Memory and Main Memory may be Erased and Programmed separately. |
| 3. | To access Information Memory only set the Device Configure range between byte addresses 1000h – 10FFh. |
| 4. | To access Main Memory only set the Device Configure range between byte addresses F000h – FFFFh. |
| 5. | To overwrite calibration values and other information in Information Memory Segment A at byte addresses 10C0h – 10FFh select Overwrite Calibration Data in Device Configure. |
| 6. | For Compare byte addresses 10C0h – 10FFh are ignored. Use Read to read from these addresses. |
| 7. | Byte addresses 7FE0h – 7FFFh are Interrupt Vectors. Programming invalid data to these addresses may prevent further access to the device. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Texas Instruments |
|---|---|
| Packages | TSSOP(28) |
| Part Number | MSP430G2313IPW28 |
| Vcc(program) | 3 |
| Package |