Release Notes on BPWin Software
Latest Release/Date:
BPWin 7.0.7 Release Notes
BPWin Highlights Release of BPWin eMMC File Builder Wizard. The file builder wizard saves time, streamlines workflow, and eliminates errors when combining multiple data files into a single data pattern. The Wizard is an automation tool that utilizes a standard Excel...
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
BPWin 6.2.6
BPWin 6.2.6
BPM 3000/4000 Series Autohandler
- Added WhisperTeach™ functionality for 4x enabled APS
- Improved BPWin launch time by opening inspection software only when it is part of the Workflow.
- Resolved crash observed after running two consecutive jobs and removing a peripheral from the workflow in between both sessions.
- Added instructions for the user at Pick-and-Place Position Tool Dialog.
- Implemented 2-step inspection for small leaded devices necessary for Scanner Tech 3D vision system.
- Enabled workflow to support inspection before laser marking.
- Resolved placing devices in incorrect orientation after rejected due to failing vision inspection. This was happening only for workflow Source->Inspection->SameSource.
- Resolved issue where the first device inspected by UltraVim would always be rejected.
- Resolved motion pause observed when moving to or from 3D inspection.
- Fixed Z inspection height for small leaded devices when using the Scanner Tech 3D system.
- Resolved issue where UltraVim 3D inspection software was not opening when accessing Scanner Tech teach.
- Improved interaction between BPWin and inspection system to speed up access to Workflow dialog.
- Added ability to customize UltraVim camera rotation in teach dialog.
- Fixed an error that occurred when the wrong socket module is installed.
Device Programming
- Reverse Insertion test support for 9th gen programmers.
- Fixed an issue on 9th Gen that occurred for some 1.8V device algorithms.
- Improved Gen 9 compatibility with legacy algorithms
- Resolved Continuity Test yield issues for some devices on 9th Gen.
- Fixed a bug that resulted in an error where 9th Gen LEDs could not be configured.
- Fixed a crash that can occur when running the second job session after loading a JobMaster file with serialization enabled.
- 9th gen systemic bug fix for erase failure with Altera EPCE16 and similar devices.
- Fixed a bug that occurred when loading an ABP file as a data file.
- Fixed a bug on 9th Gen that caused some algorithms with multiple Vcc sources to fail.
BPWin 6.2.5
BPWin 6.2.5
BPM 3000/4000 Series Autohandler
- Corrected an issue where motion controller code would not properly download on legacy machines.
- Corrected an issue where connection to UltraVim fails during Scanner Tech Vision inspection teach initialization.
- Improved Scanner Tech inspection process by leveraging signals from UltraVim software.
- Corrected a problem causing Scanner Tech inspection system not to be recognized in an inspection-only workflow with the same media as input and output.
- Enhancements to Windows Account Based Security features.
- Resolved an issue where some users were frequently seeing z-limit errors on a 4x machine.
Device Programming
- Corrected a problem with 9th gen socket B yield failures.
- Added gang support for 2 and 4 SM/ASM sockets on 9th gen programming sites.
- Corrected a problem for PIC32MX device family failing on slave sockets.
- Added a new Jobmaster option “Keep job loaded on JIC Failure” that, when enabled, provides a supervisor mode option to permit the job session to continue after failing Job Integrity Check.
- Corrected the warning message when loading a 1710 Jobmaster file on a 2710 programmer.
- Resolved an issue with Continuity Test that occurs on some 9th gen algorithms.
BPWin 6.2.4
BPM 3000/4000 Series Autohandler
- Corrected a problem when the site is disabled but the stepper motor will not raise when the user clicks the “close sockets”
- Corrected an issue where the machine would not initialize with LPLA Cyberoptics camera
- Improvements to Inc120 Cyberoptics usage.
- Corrected an issue where Keyence laser users were having unsupported specifier errors during laser test when no specifiers were used.
Device Programming
- Corrected an error message and clarified instructions for performing AC measurement during calibration verification.
- Enabled customers to be able to certify 9th Gen site calibration through COC.
- Increased the reliability of analog slew rate test.
- Corrected a device continuity error that appeared for some algorithms on 9th Gen.
- Increased the reliability of analog slew rate test.
- Corrected a device continuity error that appeared for some algorithms on 9th Gen.
- Corrected a problem where some 9th Gen sockets were not being fully actuated when 4 sockets were installed on a given site.
- Corrected a problem where the Mechanical Benchmark device selection would issue a site memory integrity error.
- “Unsupported” error message is removed for Freescale Semiconductor MC9S08QG8CDTE or other devices when auto continuity is set as the reverse test on 9th gen site.