Release Notes on BPWin Software
Latest Release/Date:
BPWin 8.0.6 Release Notes
BPWin Release Highlights Improved STPL File Compilation for 9th Gen Platforms - Resolved a compilation error affecting STPL files that use variable-based delay commands on 9th Gen systems. This enhancement, identified in DSR-19141 with Microchip APA450-BG456I,...
6.4.5 Release Notes
BPM 3000/4000 Series Autohandler Improved the accuracy of the package auto-measure feature for leaded devices. The dimensional data gathered by the CyberOptics alignment camera is automatically populated into the...
6.4.4 Release Notes
BPWin Highlights Broad support for HS400/HS200 modes for eMMC devices on 9th Generation sites and existing socket cards. Program/Verify at up to 148 MBytes/second and beyond. Support for these modes can be requested...
6.4.3 Release Notes
BPM 3000/4000 Series Autohandler Improved site stepper motor cycling on 8th and 7th generation APS by stopping the motors when the interlock is open. 9th Gen automated programmers already have this behavior. Increased...
6.4.2 Release Notes
BPWin Highlights Added a feature to secure JobMaster files and ensure they can never be modified. This feature can be found in the JobMaster/Configure named "Lockdown JobMaster Files". When JobMaster files are saved...
6.4.1 Release Notes
BPWin Highlights In the latest BPWin release, we've implemented a new feature that allows our users to retry all device operation failures, which improves the job yield. Other highlights include: Improving our...
6.4.0 Release Notes
BPWin Versioning Updates Effective with BPWin 6.4.0, we have adopted a simplified sequential software versioning scheme to include the release number and date. BPWin “Betas” (what we called Algo releases) will no...
BPWin 6.2.10
BPM 3000/4000 Series Autohandler Improved communication with the 4900 Fiber hybrid laser to eliminate "Busy Error" failures Fixed issue where Autohandlers with a legacy Galil 1040 controller...
BPWin 6.2.8
BPM 3000/4000 Series Autohandler
Added support for X-Stream Tape Feeder.
Added a setting to enable BPWin to automatically set the 3D inspection part file name (Only applicable to the ScannerTech system).
BPWin 6.2.7
BPM 3000/4000 Series Autohandler
Added vacuum diagnostic for machines with Whisperteach
Incorporated Z home sequence after failing auto Z teach.
Added 3D vision inspection permission to WABS
BPWin 6.2.6
BPM 3000/4000 Series Autohandler
Added WhisperTeach™ functionality for 4x enabled APS
Improved BPWin launch time by opening inspection software only when it is part of the Workflow.
Resolved crash observed after running two consecutive jobs and removing a peripheral from the workflow in between both sessions.
Added instructions for the user at Pick-and-Place Position Tool Dialog.
BPWin 8.0.2 Release Notes
BPWin Release Highlights
- Added a laser power/speed ratio limitation feature for laser markers using Prolase software. BPWin will determine whether the operator entered power/speed settings are within the “polygon accepted” values, preventing unacceptable settings.
- 3000 series fiber laser users can mark serialized QR codes for traceability at the component level.
- Added support for the legacy UX46 3D Inspection camera on the 3000 Series APS.
Other Updates
- Fixed a semaphore timeout issue during broadcast operation for 9th and 10th Gen programming technology.
- Fixed a Runtime error for some 6th and 7th Gen sites related to autorange.
BPWin 8.0.1 Release Notes
(Scheduled for 02/13/2024 release)
BPWin Highlights
- Improved 10th gen programmer site diagnostics to make the process faster and more efficient.
- Released a 3000 series Laser Calibration pattern for laser focus adjustments. This feature supports a well defined process for both CO2 and Fiber models. Contact BPM Customer Service for more information.
Other Improvements
- Fixed continuity failures with “Gang-4 and Gang-8” socket modules on 10th gen Programmers in manual mode.
- Fixed “BP Mechanical Benchmark” failure on 8th Gen systems.
- Fixed a missing FX8 DPL variable causing Macro error during Short Circuit Test on 9th Gen.
BPWin 8.0.0 Release Notes
BPWin Highlights
- Restore COR_X and COR_Y registry values to default every time before PNP initializes, to prevent the values from affecting the home Z process. This feature eliminates the need to manually delete registry values.
- Added a registry key value pair to give users an option to default “Verify teach by picking in diagonal location” to “No.” This changes the default value to streamline the teaching process for JEDEC trays.
- Integrate 10th Gen support into standard BPWin release cycle.
- Enabled “V4-45” 3D Inspection hardware feature on BPM310 and 3928.
Other Improvements
- Fixed a bug to allow REJECTS as a valid location for use during the Test Lase session. Previously the Test Lase session failed to end as expected.
- Fixed a bug to allow the socket identifier specifier to be used in the Test Lase process.
- Fixed a runtime error for NAND devices, caused by autorange implementation.
- Fixed a Job Integrity Check (JIC) error preventing jobs from running when using autorange and serialization together.